I-TPP016D 16 Port Passive Transceiver Hub
in 1U Rack Mounting Panel
Features:
- Identical to I-TPP016, but using RJ45 termination instead of terminal block.
- 16 BNC connector for video output, 4 x RJ45 connector for 16 channel
video input.
- Use with I-TTP414V, or with I-TTP111VPD-RJ45 + I-TDP016 for a truly
professional RJ45 cabling solution
 Specifications & Sample Application Drawing
|
 |
I-TPP016VPD 16 Port Passive Video, Power, Data UTP Hub
with AC Power Supply in 1U Rack Mounting Panel
The 16-channel I-TPP016VPD CCTV hub is uses standard twisted pair cable
(24AWG recommended) to carry video, power and data for simplifying short
range installation by centralizing power and reducing installation labour
costs. The built in 8AMP AC24V power supply could support at-distance
camera loads up to 500mA per channel. Each port built in switch to set the unit
to power 2 pairs or 3 pairs. To use with I-TTP111VP3 , I-TTP111VPC,
I-TTP111VPD-RJ45 at camera side to send video, power or data for cable
runs 300 meters (max.)
Features:
- Integrates and sends video and power, data over a single 4 pairs twisted
pair cable up to 300 meters.
- Built-in switch at each port to set unit for "2 pair power + 1 pair data"
mode or "3 pairs power" mode.
- Powers cameras via 2 or 3 pairs UTP cable over a variety of distances
(please refer to below power distance chart).
- 8 Amp AC24V power, each port output current up to 1.1Amp for camera,
max up to 8 Amp.
- Built-in "no fuse breaker" to avoid current overload.
- Built in PTC (Positive Temperature Coefficient) for short protection and
auto rework on each port.
- Perfect cable management solution from the camera to the wiring station,
control room.
Specifications & Sample Application Drawing
|
 |
